How to Decorate Your Home

A new home is a blank canvas; you get the opportunity to transform each and every room into a personality filled space that you’ll adore. Whether you’re tired of your old space or you’re moving into a new one, decorating it is imperative to adding coziness and charm. Try changing up large aspects of your home along with incorporating small details, for the best results.

Method 1. Making Big Changes

1. Paint your walls. If you live in a rented space, this might not be an option for you. However, if you’re able to, painting the walls in your house can be one of the quickest ways to freshen up the look and add a bit of interest. Choose a color that complements your personality and fits your space. If you’re bubbly and fun, consider a golden yellow or bright green. Calm and collected? A shade of gray or blue might be more your pace. Paint isn’t permanent, so feel free to experiment with colors until you find a look you love! heat transfer for t shirts

  • Don’t be afraid to try several colors spread throughout your home; although you don’t want many different bright colors, painting each room a different color is totally appropriate.

Although it’s not as in style as it used to be, you can apply wallpaper on an accent wall to add a bit of pattern, if you want. There are even wall decals that act like wallpaper but are removable, if you’re afraid of the permanence of it.

If you’re not ready to paint one whole room (let alone your house!), try adding an accent wall. This is when you paint just a single wall in a room, typically one that gets a lot of attention, a bright or cheery color that matches your décor.

2. Try out new furniture. Furniture is arguably the most important aspect of decorating; if you’re short on furniture or have been using the same pieces for many years, consider bringing some new furniture into your home. Choose comfortable pieces in colors and styles that match your personality. Don’t be afraid to try something other than what the store model has set up; furniture that truly shows your personality will fit in your space better than boring floor model furniture you pick up because it is on sale.

  • Don’t be afraid to buy used furniture from thrift stores; it is easy to repaint and reupholster these to match your space.

Mix and match furniture rather than using only matching sets; you’ll end up with a more unique look, and probably save some money in the process.

3.Use decorative storage. Whether you’re incredibly organized or a bit of a hoarder, nearly everyone has stuff that needs to go into storage. Rather than shoving it under a bed or in the back of a closet, try using decorative storage instead. Look for ottomans that store things in their hollow centers, entertainment centers with doors, and large bookshelves and hutches to hold your knickknacks. By using storage that’s attractive, you kill two birds with one stone.

  • Cover shoeboxes in fabric or spray-paint store-bought storage crates to create sophisticated solutions to your storage problems.

Book cases can be used to store nearly anything, aside from books. Consider placing one in your kitchen to hold dishes or in your living room for assorted decorations.

When you buy new furniture, look for pieces that have hidden storage available.

4. Refurbish old furniture and accents. If you don’t have enough money to buy new furniture for your apartment, give your current furniture a makeover. In a kitchen or bathroom, try painting the cabinets a new color or staining them. Use cheap fabric to reupholster your couches or chairs, and try a stain on your floors to change the color. Wood accents (on edges of furniture, the windowsills, trim, doors, etc.) can be painted or stained a bold new color. If nothing else, try moving your furniture into new locations and see the difference it makes on their appearance.

Method 2. Adding Decorative Details

1. Hang up some artwork. Nothing does more for a space than filling the walls with artwork, prints, and posters. Choose a selection of artwork and prints in complementary colors and themes; think nature photography, paintings, concert posters, favorite quotes, etc. Head to a local thrift store or the clearance rack of a department store and pick up some picture frames that match the sizes of your artwork. Then, hang your prints all over your home. A bare wall is a boring wall, so try to have at least a few large pieces and a few small pieces of art displayed throughout your house.

  • Keep in mind that you can paint your picture frames to match your artwork or furniture.

You can purchase incredibly cheap prints of famous paintings online, making it easy to add lots of art to your home.

2. Add your favorite pictures/memories. To make your house truly idiosyncratic and appealing, add framed photos of your favorite memories, trips, people, and locations. You can print large photographs from different experiences throughout your life to hang as centerpieces on your walls, or you can print small versions to place in standing frames around your house. People will love seeing your home filled with your favorite pictures, and you’ll always have good things to be reminded of while you sit and relax.

  • You can find cheap picture frames for your photos at thrift stores, which can then be painted to match the interior of your house.
  • Try hanging your photographs with assorted artwork in your home in a gallery display. This will allow you to showcase lots of your favorite pieces at once, and add a more personal touch than just paintings might do.

3. Add floating shelves. Floating shelves are small rows of shelves that are attached directly to your wall, allowing you to hang prints and photos around them. These are great for placing small decorative items and knickknacks on. Add glass bottles/vases of flowers, trinkets, things you’ve collected from your travels, and other pretty things to the shelves that match your interior decorating. These are also a great way to showcase art and photos without filling your walls with holes to hang them up.

  • Floating shelves are great for decorating a bathroom and allowing you to store towels and the like with a small amount of space.

Try using floating shelves in your kitchen to store cookbooks and pretty glassware/china.

4. Use creative lighting. Generic light covers and shades may come with your home, but they typically lack interest and personality. Mix up your lighting by purchasing new, more decorative options. Look for items to work as your primary light source that match the general style of the room, but that aren’t too bold. Small interesting lamps can be interspersed throughout your home to add light and flare to your style. If you’re interested in DIY, you can purchase old lamps and shades from a thrift store and spray paint or cover them in fabric for a fresh new look.

  • If you’re using multiple lights in one room, try to vary the sizes, colors, and shapes of the lamps (unless they’re a matching set).

You can never have too much light, so don’t be afraid of using several light fixtures in a single room or a small area.

5. Hang up some new curtains. Curtains are one of the most underused style tools in decorating a home. With just a bit of carpentry work, you can install curtain rods and add lovely curtains that match your furniture perfectly. Look for curtains that have plenty of color or pattern to brighten up your room. If you’re working in a space you’d like to keep dark (like a bedroom), you can add room-darkening curtains or drapes in dark hues to block out light. If you’re trying to make a space look bigger, add light colored and textured curtains.

6.Look for matching rugs. The purpose of rugs is dual in nature: cover up unattractive or dirty flooring and add interest and pattern to your floor. Look for rugs to fill up the empty spaces in your home; these will make your house seem full of furniture even when it’s a bit bare. Find rugs in colors and patterns that match your décor (or go with it; too much ‘matching’ might look boring). Rugs can be places in nearly every room of your home, including your kitchen and bathroom, so don’t be afraid of getting several!

  • You can purchase cuts of carpet and have them finished to create your own rug for your home, for cheap.

Tips

  • Try adding interesting details like houseplants, or changing out doorknobs, for subtle changes that make a difference.

How to Remove a Bumper Sticker from Glass

A bumper sticker is a small piece of Polyvinyl Chloride (PVC) that is used to decorate a car, bicycle, home window or other object. Its name is derived from the fact that it is traditionally placed upon the back bumper of a car to advertise support for a political candidate, sports team or organization, although it can also be a simple joke, quote or decal. In many countries, bumper stickers are referred to as “country tags,” small stickers with letters designating the country of a car’s origin. In order for these stickers to last through outdoor weathering on a bumper or glass window pane, they are made with strong adhesives. The longer the sticker has been adhered to a surface, the harder it will be to get off. Luckily, removing bumper stickers from glass surfaces is possible using household tools and ingredients. This article will tell you how to remove a bumper sticker from glass.custom NHL decals stickers

1. Protect the area around the bumper sticker using pieces of cardboard, paper towels and painter’s tape. Tape pieces of cardboard and paper towels below the sticker to catch drips of liquid. Although the glass itself is not likely to be harmed using any of the materials needed to remove the bumper sticker, paint or wood around the glass can be damaged if oil or liquids leak onto them.

2. Warm the bumper sticker with a hair dryer for 2 minutes, in order to warm the adhesive glue on the back of the sticker. If the cord will not reach the glass, let it sit in the hot sun or pour boiling water over the sticker and glass to warm the glue.

3. Attempt to loosen the edge of the sticker with a credit card, razor blade, or a plastic or metal paint scraper. Recently affixed stickers may be removed simply by heating the glue and gently prying the edges with a metal or plastic instrument.

4. Soak a paper towel in white vinegar or olive oil, if the sticker is still affixed.

5. Blot the bumper sticker and the area outside of the bumper sticker with vinegar or olive oil. Repeat 3 times in order to ensure the surface is covered.

6. Wait 3 minutes for the vinegar or oil to penetrate the PVC.

7. Take your plastic or metal instrument and gently push it under the edge of the bumper sticker.custom mlb stickers Try to get a length approximately equal to half of your index finger, so that you will be able to pull on it later with your fingers later in the process.

8. Leave the edge you have just brought up and work the straight edge under the other edges of the bumper sticker, until you have raised all the edges.

9. Pull gently at 1 section of the sticker with your thumb and index finger, stopping if the sticker no longer moves or begins to rip.

10. Pull gently at other edges in turn, switching sides frequently, until the sticker is removed.

  • If the sticker rips, coat it in another layer of white vinegar or olive oil and wait a few more minutes for it to penetrate, then try to scrape the thin layer up with your sharp instrument.

11. Clean the area with water and/or glass cleaner before removing your protective barriers.

Tips

  • Bumper sticker removal can also be accomplished with WD-40 or denatured alcohol. Use them in a similar manner to the white vinegar or olive oil, but be very careful not to let them get on surrounding surfaces.
  • Place your ingredients, like vinegar and straight edge near you before using the blow dryer, sunlight or boiling water, so that you can start the process of removing the sticker just after the glue has been warmed.

Warnings

  • Always be careful when working with a razor blade or sharp edge. Use small, gentle motions with the blade and never place your opposite hand on sticker when you are attempting to scrape the sticker from the glass.

    Things You’ll Need

    • Painter’s tape

    • Paper towels

    • Cardboard

    • Hair dryer, boiling water or sunlight

    • White vinegar or olive oil

    • Razor blade, paint scraper or credit card

    • Water or glass cleaner

How to Cut Vinyl Using a Vinyl Cutter

Unlike printing a picture, cutting vinyl to create graphic decals is a bit more involved. Following is the process flow for the steps necessary to cut vinyl and apply your decal to your target surface.

1. Create your artwork.

  • Simple artwork like text is the easiest artwork to cut with a vinyl cutter. All keyboard fonts are considered vinyl cutter ready vector art (VCRVA or VCVA). All text on all the Windows or Mac included fonts can be typed directly into a vinyl cutting program. This includes fonts like Symbol. Alternatively, you can draw shapes and prepare vector art specifically for vinyl cutting with a graphics program like InkScape, Corel Draw or Adobe Illustrator. Usually, when people want to vinyl cut an image, creating clean vector art is the most time consuming process but yet it is the most important.
  • Creating clean VCRVA is even more time consuming because adequate thought has to go into figuring out what portions of your design you are going to keep and what portions you are going to remove or ‘weed’ away.custom mlb stickers
  • If you take a photograph and bring it into a cutting program like Flexi Starter 10 and automatically convert it into vector art you will likely have a mess to clean up. Vector art format differs from bitmap or JPEG art format in that vector art contains lines and arcs to define the picture whereas bitmaps and their equivalents are just a pattern of pixels without any edge definition. Your vinyl cutter can cut lines, arcs and circles but cannot cut a pixel so all artwork must be converted to vector art so your vinyl cutter can cut it properly. It turns out that Flexi interpreted the yellow as 8 shades of yellow and created edges between the different shades of yellow and separated these edges onto different layers. In the end, a simple black, yellow and blue image ended up being 25 different colors and had edges on 25 different layers. Most of the issues associated with vinyl cutting are related to vector art quality. custom NHL decals stickers

2. Aside from simple fonts already in the Windows or Mac operating system, you can purchase additional fonts, or you can purchase artwork that is Vinyl Cutter Ready Vector Art such as the Mega Vector Art Collection. Also, if your artwork is complex, consider sending it out to an outside vendor to have it vectorized for you. There is also software available such as Vector Magic that can do auto-vectorizing and cleanup for you.

3. Bring your artwork into a vinyl cutter cutting program. Once you have created artwork in a program such as Illustrator, Corel Draw or InkScape, you will need to import it into a vinyl cutter program. There are several vinyl cutter programs available on the market. The most common is Flexi Starter 10 (and numerous private label versions of it) followed by programs like SignCut. These programs will lay out your artwork on your vinyl, create weeding lines, create a weeding frame or box, allow you to make copies in rows and columns, scale and rotate, layer the cuts and do several other functions and finally, send the cutting commands to the vinyl cutter.

4. Connect up your vinyl cutter. Different vinyl cutters will have various methods to connect up to your computer. Many if not most these days connect up through the USB port. Once you have established the connection between your cutter and your computer (some drivers may need to be installed) you will need to choose the port or the specific cutter in the sign cutting software to establish the connection between your vinyl cutter and the software.

  • The vinyl cutting industry is more geared to PC’s and not Macs. There are systems that are Mac compatible like SignCut but Flexi is not very Mac compatible in its current version. Make sure that your cutter is in the online mode and that the cutter and correct port are selected in the cutting software. This is very important to establish proper communication.

5. Load your material. Basically, vinyl material is roll fed into a vinyl cutter and hangs off the back side of the cutter on rollers or on a roller bar. Feed the vinyl under the pinch rollers and on top of the roller bar and then release the rollers to hold the vinyl in place.

6. Select and set up setup your blade. Blades usually come in angles from 20° to 60° or so. The larger the blade angle, the sharper the blade, but the quicker the blade will dull. 45° blades strike a good balance between wear and sharpness. 60° blades are sharper and are widely used.

  • Setting up blade depth and pressure or force is critical to getting good cuts. There are basically two parameters that need to be set to achieve good cutting. One is blade depth relative to the carriage and the other is pressure set by the cutter. These parameters vary in importance between machine manufacturers.
  • A good way to set blade tip height is to peel off the vinyl and expose the vinyl backing. Place the blade holder in the down position.
  • Some machines have a button control that will allow you to automatically push the carriage to the blade down position while for other carriages you will need to push down on the blade holder manually. Fasten the blade position so that the tip of the blade is slightly penetrating the top surface of the vinyl backing. From here, you will need to set the pressure.

7. Create a small line of text that you can send to the cutter. Set the pressure at a low level and send a cut to the cutter. Chances are that you will not cut fully through the vinyl. Increase the pressure by an increment of your choosing, move the carriage over and cut this same text again. Continue to do this and remember the pressure setting for each cut until you are penetrating the vinyl backing but not going through it.

8. Weed all the text you have cut. The one that weeds the best and leaves a slight impression on the vinyl backing is the optimized setting for this vinyl. This process of setting blade tip depth and pressure may need to be repeated each time you change vinyl type as the release liner thicknesses and vinyl characteristics will change from roll to roll and may require different tip depths or cutting pressures. Usually, once a cutter is setup for vinyl, you can cut that roll and additional rolls as long as it is all the same type of Vinyl.

9. Cut your artwork. Use the cutting feature of your sign cutting software to send your artwork to the vinyl cutter. Cutting your artwork can take as little as a few seconds to several hours depending on complexity. Most simple signs and decals take just a few minutes.

10. Remove your cut vinyl. Advance the vinyl roll with the cutter control panel or release the rollers and pull your vinyl forward. Use rolling scissors to trim your vinyl from the base roll.

11. Weed your vinyl. Assuming you did a good job setting up your cutter your artwork should weed relatively easily. Weeding is the process of removing material that you don’t want in your graphics. The smaller the features in your graphic, the more challenging weeding can become. Use a weeding pick to carefully pull up and remove the portions of vinyl that you don’t want to transfer to your target surface. Strategically placed weeding lines are recommended to make this process easier. It is sometimes very difficult to weed all your unwanted material if it is all connected in one piece. This is also sometimes a time consuming and delicate process.

12. Apply transfer tape. With your image weeded, the next step to take will be to transfer your image from the release liner to the target surface. TIP: If you are applying your image to the inside of glass make sure to cut the mirror image so it appears correct when viewed from the outside of the glass. Transfer tape is similar to masking tape but has a different tack for adhering to your vinyl but releasing it on the target surface. Use a semi-transparent transfer tape to apply your graphics. Transfer tape comes in many widths up to about 48″. If you have an image that is 6″ tall but only have transfer tape that is 4″ wide you can lay multiple strips down to cover your image completely and overlap the transfer tape by ¼” or so. You will want to use your squeegee with a felt sleeve to rub the transfer tape on the vinyl to insure good adhesion.

13. Prepare your target surface. Your target surface should be prepared by cleaning with rubbing alcohol or other similar cleaner to remove grease, oil and dirt. In addition, the surface can be prepared with an application liquid spray that will allow the vinyl to not immediately stick to the target surface. This will allow you to reposition the graphic on the target surface before allowing it to dry and permanently adhere and remove air bubbles. This saves lots of time and avoids having to redo the job.

14. Apply your graphics. Peel the transfer tape away from the release liner and your graphics should come with your transfer tape. If they don’t, push the transfer tape back down and use your squeegee again to stick the transfer tape to the decal. Take this decal and apply it to the target surface. From there, use your squeegee with a felt sleeve to smooth your decal on your target surface removing all air bubbles. Allow to dry if you applied application liquid and then peel off your transfer tape.

Tips

  • If you are making decals and doing vinyl cutting you will want to look through all the symbols in your fonts as all of them are VCRVA. To do this in Windows, go to Start, Settings, Control Panel, Fonts and look through all the fonts so you know what you can work with. I am especially fond of Wingdings, Wingdings2 and Wingdings3. In Microsoft Word go to Insert, Symbol, More Symbols to pull up the Symbols to review everything and flip through the various fonts. Fonts can also be selected and reviewed in most vinyl cutter programs.
  • If you do have this done professionally make sure that the people doing your vector art know that you intend to cut the artwork with a vinyl cutter so it can be designed properly for weeding. Cleaning up complex images is time consuming and if you aren’t good at it then it may not be worth your time to do this yourself.

How to DIY Print Tights

Can’t find the right tights design or want to create something unique? You can use a simple symbol that can be transferred from a cardboard homemade stencil for your design, making these tights one-of-a-kind.

1. Create your stencil. Freehand or download a paper template from the Internet and trace it onto the cardboard. iron on transfers for t shirts

  • Use a simplistic design for your stencil. Too many edges and an intricate design may not work well with this project.
  • Cut out design using your scissors. You will be painting inside the template.

2. Put on tights. For the best result you will need to paint the design directly on the tights while you are wearing them.

    • Put on solid pair of tights first. In order to protect your skin from the paint, you will need to add a pair of tights underneath the set you plan to paint.
    • Add the sheer tights over the solid.

    3. Place stencil on the tights and tape in place. Make sure you like the placement before adding paint.

    4. Paint the inside of the stencil. You want a thick covering of paint, but not so much so that the paint runs.

    5. Set design in place by applying a blow dryer to each painted section for approximately 20 seconds.

    • Run dryer on both heat and cool settings to set and then dry paint.

6. Remove tights carefully. Peel paint away from your bottom pair of tights with care. If you see paint on the bottom pair of tights that appears to be wet, replace tights and allow for longer dry time.

Things You’ll Need

  • Sheer tights (new, solid color)

  • Solid tights (choose an old pair)

  • Acrylic paint

  • Blow dryer

  • Clear nail polish

  • Paintbrush

  • Scissors

  • Painter’s tape

  • Stencils (design cut from cardboard)

  • Tips

    • Hand launder tights in cold water with detergent meant for delicates.
    • Use soap and water to remove any paint on your skin.

How to Make a Logo on Clothes

Tired of that plain t-shirt that´s been living in your closet since forever? Thinking of tossing it, although it´s still good to wear? Please don´t! Here´s how to put logos on a t-shirt (or any other clothes for that fact).

Step 1. Buy the paper. You can’t do this with any other paper but special transfer paper.

Make a Logo on Clothes v1

Step 2. Get a design made up on Photoshop or Gimp or any other image editing software. And remember to create it in reverse!

Make a Logo on Clothes v2

Step 3. Print the design or image out on the transfer paper

Make a Logo on Clothes v3

Step 4. Pre-heat the clothing iron to the temperature noted on your package.

Make a Logo on Clothes v4

Step 5. Lay your jeans or t shirt or other clothing item out on the ironing board.

Make a Logo on Clothes v5

Step 6. Heat it up with the iron for about 5 seconds.

Make a Logo on Clothes v6

Step 7. Place the transfer sheet face down on the area you want to transfer the image to, for the time noted on your package (may vary due to brand or quality).

Make a Logo on Clothes v7

Step 8. Lift up your customized t-shirt. Bask in the glory and satisfaction of a DIY custom t-shirt. There’s only one and it’s yours, congrats!

Make a Logo on Clothes v8

Tips

  • Print in reverse.
  • Read your package.

Things You’ll Need

t-shirt (or other clothing item) design to put on your clothing transfer paper iron ironing board

Warnings

  • Be careful with the hot iron!