How to Remove Stickers from Glossy Paperback Book Covers

custom NHL decals stickers Stickers are a pain to remove, but on glossy paper book covers, they’ll look like a cinch. This article will teach you how to remove one.

1. Dip a cotton ball in a bottle of 91% rubbing alcohol. Make sure it is completely wet around all the sides of the sticker alone. Be careful that it isn’t the 70% rubbing alcohol variety, as those can be less potent and therefore won’t remove as easily.

2. Rub the wet end of the cotton ball on the edge of one of the sides of the sticker. Rub the sticker until it begins to discolor.

3. Move the cotton ball down and “coat” this area of the sticker too with the same method above.

4. Continue until you’ve reached the bottom section of the sticker, but don’t stop rubbing yet.

5. Take the other end (by now you’re wet end has probably turned dry or has lost it’s fuzzy end altogether) and dip it into the rubbing alcohol. Repeat the wetting process for this end of the swab/ball.

6. Move slightly across the sticker until you reach a point where the spot can overlap the edge of your last rubbing area.

7. Rub the spots onto you’ve gotten two lines worth of rubbing alcohol applied to the sticker from the cotton ball.

8. Take your fingernail and begin to pry up the (what should be now) wet sticker. It’ll begin to remove. Peel it back slowly and at a slant, working backwards as if to reach the opposite diagonal’s corner portion of the sticker.

9. Reapply and re-work area of the sticker with another wet cotton ball, if it stops becoming detached from that point, or if the sticker doesn’t want to remove cleanly from the area.

10. Clean the area of the sticker, nhl stickers once the sticker has been completely pulled up, with another cotton ball and a little bit more rubbing alcohol. You may still see pieces around the cover where the sticker was where the glue hadn’t been completely removed, or where the rubbing alcohol couldn’t completely get a full grip far enough through the sticker’s inner threads to reach the glue that stickers use.

  • You may even choose to use some cotton swabs to do this portion of the task.

11. Look at the book, it’s sticker should be removed now custom mlb stickers.


  • On top of discoloring the edge of the sticker,car art stickers if not done properly, you may end up discoloring an edge of the book cover. Be careful exactly how far over the sticker you choose to rub.

How to Make a Hat

Need a hat? With so many hat styles in the world to choose from, it can be difficult to know which hat you want to make. In this article, you’ll find a round up of various different possibilities for making a hat, and maybe these ideas will set you on a journey of making many other kinds too!

Method 1. Sewing a Hat

If you enjoy sewing, there are many possibilities for stitching a hat. Here are just a few ideas.

Image titled Make a Hat Step 1

1 Sew a fleece beanie or a fleece hat. Polar fleece, aka vegan wool, makes for a very toasty hat during the cold winter months.

2. Sew baby hats. Baby hats are an important part of a baby’s wardrobe, to ensure warmth and comfort. Some ideas to try include:

  • Sew a baby hat, complete with cute ears.
  • Repurpose a t shirt into a newborn’s hat.

3. Sew a Peter Pan hat. Ideal for fun wear or for a costume, this easy hat is made from felt.

Method 2. Knitting or Crocheting Hats

1. Knit an easy hat. Ideal for the beginner to sink their needles into, this is a good way to make a new hat for winter.

2. Crochet a hat. Crochet has a delicate look yet it holds well and makes an ideal medium for hats.

3. Make a hat with a knitting loom iron on NHL Embroidered Patches. If you own a small knitting loom, this is a neat project for putting together a nice hat.

Method 3. Folding Paper Hats

Paper hats are something almost everyone can make with a little practice. They’re ideal for quick costume fixes, for playroom fun and for any other reason you’ve got in mind!

1. Make a basic paper hat. This simple hat can be used for a sailor’s or captain’s costume, for a pirate theme or for anything else you fancy.

2. Make a hat for a pirate. Whether from paper or card, there are various ways to grace the crown of the pirate in your life!

3. Get partying with a party hat custom NHL decals stickers! What would a party be without the typical decorate cone party hat? It’s easy to make and fun to wear. That is, until you see it reflected back on Facebook with your mug under it…

4. Make a paper samurai hat. Fancy costume time for the samurai is complete when you add this easily crafted paper hat.

5. Make a paper Chinese hat. Another costume idea to complete your Chinese-inspired outfit.

Method 4. Crafting Halloween Hats

Choose a theme first, then make your hat. There are many possibilities for making Halloween hats. Here is just a small selection to get you started:

  • A witch hat
  • A Halloween chef hat
  • A clown hat.
    Method 5. Using Hat Making Skills

    If you’ve already had some experience at making hats (millinery), the world of hats really is your oyster. Here are a few of the more complicated ways to make hats.

    1. Make a felt hat. Felt hats are shaped to a head or hat block. They require some expertise but the final result is really head-turning.

    2. Make a mini top hat. While the original top hats required a lot of work, this one is a simple version that you can make quite quickly.

    • Or, perhaps you’d prefer to make a duct tape top hat instead?
      Method 6. Hats for Pets

      1. Make your dog a hat. Whether it’s for a party or to keep the sun off, you’ll find a few good ideas here.

      2. Make a cone hat for your cat. Not only does this rhyme but it can really bug your poor kitty as you take those Pinterest pics of her hat-wearing cuteness. Very easy to make.


      • Making hats using blocking techniques (millinery) is quite a skill that needs to be learned from someone who has experience in this. It is recommended that you seek tuition if you’re just starting out in making hats this way. custom images printing

        Things You’ll Need

        • Fabric, yarn, or other materials

        • Head sizes

        • Appropriate tools

        • Embellishments suited to the hat style and material (optional)

How to Host a Christmas Tree Decorating Party

You got a Christmas tree, but with the tree looking so large, you feel you need help to decorate it christmas iron on transfers? Well, have a party. That tree will be finished in no time! This article will tell you how to plan that party and have a great time.

1. Set aside a day when everyone can come together and help you decorate your Christmas tree. Invite your relatives and family to help you. Have it be a family affair, or try inviting friends and neighbors, if you think they’d want to help.

  • Have your invitees call in or email their RSVP to you, to avoid relying on the mail in the postal service’s busy time of year.

2. Get your tree up and ready. Buy or chop down the tree and place it up for display, so that all that needs to be completed for your helpers to do is to decorate it.

3. Turn on some Christmas holiday music. Keep things light and airy and dedicated to the topic at hand – decorating your Christmas tree.
4. Welcome your invitees into your house. Talk amongst the group of family and relatives. Collaborate on what needs to get done around the house to spruce things up for the holiday season, but try to switch gears shortly thereafter to get the real party started.
5. Give everyone the “tools” they need. Show people the tree, along with the boxes or ornaments, tinsel, Christmas lights and whatever stuff the tree will need that have been put to the side. Keep them nearby as that’s part of the plan.

6. Have one or two people help out with stringing Christmas lights. One person can work the lights in the back of the tree, while the other can help with those lights when they reach into the front.

  • Start with stranding the lights from bottom to top (unless your outlet is near the top of the wall and out of the way of the tree).

7. Get decorating. Have a few people work on adding ornaments to the tree. With ornaments, always work from top to bottom, never bottom to top, and definitely don’t stagger from random places on the tree. Decorate the back of the tree with ornaments as well as the front. Skip a random branch or two to avoid making the tree off-balance.

  • You can try setting up a “production line” or “factory line” for passing on decorations when adding ornaments MLB iron on transfers for jersey to the tree, but keep in mind that too many people and things could get confusing, and you can easily end up with uneven branches, or worse yet, ornaments on every branch of the tree or broken ornaments.
  • As people finish their side of the tree, they can settle back and snack on some chips, cookies or cake and collaborate.
 8. Let the talking continue, as you watch and talk with them. But don’t just sit back and relax, get in there and help out.
 9. String the Christmas angel or star (tree-topper) at the top of the tree
 10.Hang some tinsel or popcorn-strands on the tree. Jazzy the tree up with decorative items.
11. Finish up! Let those dedicated to decorating the tree take a final look around the tree, to ensure that no single branch is out of place and the tree looks spiffy. Take some photos of your hard work, and be sure to get a shot of everyone who helped, posing with the end result. If you have the technical know-how, why not film the whole thing with a camera on a tripod facing the tree. The completed film can then be ‘time lapsed’ to create your own short film.


  • Talk amongst yourselves; collaborate! If you see something some else has done incorrectly, go ahead and fix the issue. Have fun and let others know where things need to be done.
  • Set aside a few hours from set up time to finishing up time to bring up all needed items to setting aside the boxes for easier take-down later. Decorating a tree can take a while, and working together can speed it up.
  • Invite any youth family members to help out. Young people like to hang ornaments (especially on lower branches). If the young people can’t reach a specific branch above their head, help lift them up so they can help with putting their ornament there. Let them be as productive as those others nearby too.
  • Don’t be a stickler for perfection glitter iron on stickers. Get in there and help out. Let the dishes sit for an hour or so, and become involved with the decorating. The less time you are not seen, the less your family and relatives will likely help you the next time you invite them over for a decorating party.
  • Hang up all other decorations for Christmas including lights in any other spots in the house and stockings for the mantel (if present). Don’t make your house completely over-saturated with decorations for Christmas though, as too much is no good either.

How to Make and Use Iron on Transfers?

What do an anti-establishment punk rocker and a grandmother who loves to make crafts have in common? Well, for one thing, they can both have fun with iron-on transfers! Iron-on transfers allow you to easily decorate t-shirts and other fabrics with images that you design yourself and print from your desktop, resulting in a truly unique, new item. All you’ll need is some fabric, transfer images, transfer paper, and an iron!

Preparing The Transfer

1. Find transfers at a store in your hometown. The easiest way to make transfer clothing iron on the transfers is by simply buying already packaged transfer kits at a crafts store, art stores, and big box retailers. These kits usually supply you with everything you need to do your own transfers including image software, some transfer paper, and maybe even a t-shirt. You can opt to use these helpful craft store kits, or go the route of creating your own transfer images, buying the specific kind of paper you want, and using your own clothing.

  • In a nutshell, iron-on transfers are images that can be impressed on fabric. On one side is paper, and on the other is the image that will be ironed on and transferred in reverse. After placing the transfer paper on the fabric and running over the back of the paper with an iron, the image is transferred by heat to the fabric.

2. Create your own transfer. Find or create an image you want to use for your transfer. You can scan an image into your computer, find one on the internet, or create one in a software program. For example, you can scan an image of your child’s artwork to your computer, print it out on transfer paper, and transfer the image of the artwork to a t-shirt. Or, you can use applications like Photoshop to create a new and unique image yourself, print it on transfer paper, and transfer that image to some other type of fabric.

  • Make sure you don’t use any old picture you might find on google. You must have the rights to an image if you are going to reproduce it and sell it (like a t-shirt). There are many websites where you can find different kinds of images that are legally safe for you to use, transfer, and sell.
  • Remember that transfer images that contain dark colors are usually going to show up on fabrics better than images with light colors. Also keep in mind that typical at-home printers don’t print the color white; they leave that area blank because the printer assumes that the paper you are using to print your image is white, and the white paper will show through the image. If your image has white coloring in it, the iron on transfer will show up clear in that area, meaning the fabric color will show in that clear space rather than the color white.
  • If you image has very light colored sections, those sections might appear discolored and distorted when ironed onto the fabric because of their light coloring mixing with the color of the shirt. Dark, solid colors provide the best looking results when using iron on transfers. The heavy colors contrast really well against fabrics and provide a darker, opaque color for the printer to print.
3. Manipulate the image. Use basic image editing software, to resize your image, add effects, change colors, or make any corrections you want, until your image is just right. The image you use can be an image from one of the many internet sites that offer transfer image options, or an image you provide yourself. As long as you can print it from your printer at home (and have the legal rights to use that image), you can transfer the image onto your fabric.


4. Mirror your image. This is only required for images printed for light colored fabrics.Make sure you mirror your image so the finished product is facing the right way, rather than reading or appearing backward once ironed onto your fabric. To make sure you’ve flipped the image correctly, the image should look flipped on the computer screen before you print it out.

  • Flipping the image is really important if you have words on your transfer image. Without flipping it, you words will be transferred on backward to the fabric.
  • To mirror the image in your computer software, you may need to use a “Reverse”, “Flip Image Horizontally”, or “Mirror” commands. See the program’s Help section for more information.

5. Use the right kind of transfer paper custom images printing. Transfer paper comes in two different variations: transfer sheets to be used on light colored fabrics, and transfer sheets to be used on dark colored fabrics. Using the right kind of transfers sheets can help ensure that you get the best looking results from your iron on transfer. For example:

  • Transfer sheets meant to be used on light fabrics are meant for fabrics that are white, yellow, light gray, or any other fabric that is light in nature. The transfer paper used for light colored fabrics is transparent. This means any areas of your image that contain the color white will instead appear clear once ironed on to the shirt. The fabric color will show through rather than the white coloring of the image.
  • If your transfer design has any light colors (other than white), the image may seem distorted and discolored once it is transferred onto the fabric. Try to use medium to dark colors when using this kind of transfer paper, so the resulting image is bold and clear.
  • Consider trimming close to the edges of your design, because the transparent areas of the paper surrounding the design can still be seen on the fabric.
  • Transfer sheets meant to be used on dark fabrics are meant for black, dark gray, dark blue, or any other dark colored fabrics. These paper sheets are thicker, and have a white backing so the color white and other light colors can show up distinctly on the darker fabric. The caveat with using this kind of transfer paper is that any background areas of your image will appear white rather than translucent. This means you’ll have to carefully cut around and inside any letters or other design elements if you want the color of the shirt to show through a certain spot rather than the color white.
  • For example, if you were printing letters, you would need to cut out the space inside an ‘O’ or an ‘R’. Or, you could have the solid white colored background as part of your design. However, more often than not, the white background isn’t the intended look for using iron on transfers on dark fabrics.

6. Print the transfer. Before you print your transfer image onto the transfer paper, do a test run by printing your image on a regular piece of paper. This test run helps to make sure that the colors of the image are how you want them to look, see if your printer will print the entire image rather than cutting a section out, and to see the size of your image. Sometimes how your image looks on the computer screen is different than how it looks once it is printed.

  • Make sure that you print the transfer on the correct side of the page. This should be clearly marked. Usually the printing side is free from any markings, and the back side has some design printed on it. If you’re not sure on exactly how to insert the transfer paper into your printer, do a test run with a normal sheet of paper. Draw an X on one side of the normal paper and have it go through your printer to see what side of the paper gets printed on.[10]
  • If you are going to be printing your image on a laser printer, you will have to buy specific transfer paper for laser printers. Normally, inkjet printers work best when printing out transfer images.

Applying The Transfer

1. Lay out the fabric. Place the t-shirt or fabric on a hard, flat surface, and smooth out the shirt with the iron if the shirt happens to be wrinkly. The surface you’re ironing on should be heat resistant (unlike an ironing board) and should be large enough to be able to iron the entire area of the transfer.

2. Trim the transfer. Trim around the transfer image so you know exactly what shape the image is, making it easier to accurately place it and position it on the fabric.[12] You’ll want to cut and stay as close to the edge of your design as possible. This will help make your transfer on image appear seamless.

  • If you’re planning to iron on your transfer to a light colored fabric, you need to wait to peel the backing off of the transfer image until after it has been ironed on.
  • If you’re planning on ironing your transfer onto a dark fabric, the backing of the transfer is going to be peeled off before you iron on the design. When in doubt, look at the instructions that come with the package of transfer paper.

3. Protect your fabric from the transfer. Place a piece of cardboard or a folded up brown paper bag inside the shirt directly underneath where the transfer image will be ironed on. Putting a barrier between the two pieces of fabric stops the the heat of the iron from transferring the image onto both sides of the t-shirt.

4. Position the transfer. Place the transfer image-side down on the fabric. Put the transfer on the fabric precisely where you want the image to be.

5. Iron on the transfer. Ironing on transfer images differs from normal ironing with an ironing board. Iron on transfers need a lot of direct heat, meaning using an ironing board wouldn’t really be efficient since ironing boards help to spread out and diffuse heat. Ironing on hard surface like Formica or a wooden cutting board would be especially useful for doing iron on transfers because they are good at retaining heat.

  • Set your iron to the hottest setting so it can transfer onto the fabric properly, but do not use steam. Steam can greatly hinder the transfer’s ability to adhere to the fabric

6. Disperse the iron’s heat evenly. Iron the image by moving the iron around in large circles on top of the transfer paper. Focusing initially on the outside edges of the image, and gradually work your way inward to the center of the image. Be sure to consistently apply pressure and iron for about 3 minutes. Keep the iron moving to prevent scorching the paper and burning the image.

  • Check to make sure the edges of the transfer are fully attached before you move onto removing the backing paper. If the edges are not fully stuck to the fabric, continue to iron the edges of the transfer. Be sure to apply steady and even pressure as you iron so the complete image is fully attached.

7. Wait for the transfer to cool. Turn off the iron when you’re finished, and let the image cool down for a few minutes. If you take off the back of the transfer paper before the image is cool enough, you could disastrously mess up the images

8. Gently peel off the backing paper. You’ll want to start at one of the paper’s corners.

Caring For Your Transferred Clothes

1. Wash your fabric correctly. Wait at least 24 hours after you’ve applied the iron on transfer before you wash your fabric. You can ruin the transfer if you wash the fabric before the image has time to completely set. Only wash and dry your fabric on a cool setting. If the transfer was done to clothing, turn the article of clothing inside out before you wash it. This adds a little bit more protection to your transferred on image. The more care you take with washing and drying, the longer your shirt will last.

2. Hand wash your fabric. An alternative to washing your fabric in the washing machine is to wash it by hand. To ensure a gentle cleaning of your fabric, you can try hand washing it with some light detergent. Don’t bleach your fabric. To dry your fabric, try hang drying it rather than using a drying machine. This gentle drying will help make your transferred image last longer.

3. Secure the edges. For extra protection against peeling, you can sew a border around the entire transfer image either with a machine or by hand. Higher quality paper should be less like to peel at the edges.


  • Cotton or cotton blend fabric works best for iron-on transfers. Other types of fabric may melt from the heat of the iron. You can also use wool, silk, velveteen, velour, denim (the softer the better), and lycra.
  • Laundering the T-shirt or fabric before you apply the transfer will preshrink the material and remove any sizing, which will help the transfer stick better.
  • Get high quality transfer paper for a better, longer lasting, more vibrant result.